All posts filed under: 3D Materials

The Recycled Materials for 3D Printers

Despite the increase of materials used and the higher speeds available for 3D printers, there is not much data available on the usable recycling materials. According to a 2017 report by CNBC, nine billion tons of plastic have been produced across the globe since the 1950’s. Approximately nine percent has been recycled. The concern is the additive manufacturing combined with the increased use of 3D printing will fill the landfills. The good news is recycled materials are the most commonly used filament type with the most minimal entry barrier. The optimization of print settings and PLA formulas has made recycled materials the best choice for the average project and creation of home goods for the last several years. The report is attempting to gather more information regarding any other materials. It should be noted PLA is more difficult to recycle because it is a biodegradable thermoplastic. The issue is a closed loop is used to test the sample. This may not provide an accurate representation. The Details of the Process for Recycled Plastics The polymer …

Comparing Open-Source and Low-cost 3D Printers with Commercial Products

When the typewriter was introduced in 1868, it was to people what virtual reality is to us now. It was something people had never seen before, a new idea that added value and made things a little more perfect. The typewriter created perfect typography, but one mistake meant the paper had to be re-written. The same is true today as more and more people learn how to use 3D printing and rapid prototyping. One over-looked mistake in the design of a piece can be fatal to a budget or to the project itself. For that reason, in this article we will discuss the implications and differences between open-source low-cost 3D printers, and commercial rapid prototyping machines. Open-Source Low-Cost 3D Printers Open-Source is the term given to software that is free to use and be edited by people other than the creator. This made a shift in the way that creators and 3D enthusiasts create objects. Imagine if the software was not open-sourced, what would happen? People would have to create and design their own 3D …